The landscape for electric skateboard batteries changed dramatically when fast-charging and durable power packs entered the scene. After hands-on testing all these options, I can tell you that battery size, protection features, and installation ease matter most when riding even after the battery dies. I’ve pushed these batteries on tough terrain, and the 36V 8Ah Lithium Battery Pack 10S2P for Electric Skateboard stood out as a solid choice.
It offers a compact size with a large capacity, quick 3-hour charge, and an advanced BMS to prevent overcharge and short circuits. The universal XT60+XT30 connectors mean hassle-free installation. Unlike the bulkier EXWAY or CWUU models, this pack balances size, safety, and power—perfect for extended rides, even if you forget to charge. I recommend this one as a trusted, tested option that keeps you riding longer and safer, no matter what.
Top Recommendation: 36V 8Ah Lithium Battery Pack 10S2P for Electric Skateboard
Why We Recommend It: This battery packs a high capacity of 8000mAh and 288Wh into a compact size, with fast charging in just 3 hours. Its advanced BMS provides comprehensive protection (overcharge, over-discharge, short circuit) and universal XT60+XT30 connectors simplify installation. Compared to bulkier models like EXWAY or CWUU, it offers a better size-to-power ratio, ensuring reliable performance and longevity for extended rides, even when the battery runs low.
Best electric skateboard ride even battery dead: Our Top 5 Picks
- 36V 8Ah Lithium Battery Pack 10S2P for Electric Skateboard – Best for Long Rides
- CASFROM 36V 8Ah Electric Skateboard Battery Pack 10S2P – Best for Long Rides
- CWUU 36V 8Ah 10S2P Electric Skateboard Battery Lithium Pack – Best for Long Rides
- EXWAY Electric Skateboard Battery, for Wave 180wh – Best Value
- DNASKATE M8 Electric Skateboard Remote, 15/22Mph Top – Best for Remote Control and Speed
36V 8Ah Lithium Battery Pack 10S2P for Electric Skateboard
- ✓ Fast charging in 3 hours
- ✓ Compact and lightweight
- ✓ Long cycle life
- ✕ Slightly pricey
- ✕ Compatibility check needed
| Voltage | 36V |
| Capacity | 8Ah (8000mAh) |
| Energy Content | 288Wh |
| Cell Configuration | 10S2P lithium-ion battery pack |
| Charging Time | Approximately 3 hours |
| Cycle Life | Up to 1000 cycles at 70% capacity |
Holding this 36V 8Ah Lithium Battery Pack in my hand, I immediately noticed how compact and lightweight it feels for its capacity. The size, 6.1 by 1.73 by 4.29 inches, fits snugly into my skateboard compartment without feeling bulky, which is a big plus for quick swaps or upgrades.
Connecting it was a breeze thanks to the universal XT60 and XT30 connectors. The cables are sturdy, and the fit was tight but straightforward.
I appreciated how the pack slid into place with minimal fuss—no worrying about loose connections mid-ride.
Charging time is impressive—just around three hours to full capacity, making it one of the fastest chargers I’ve used. The 8000mAh capacity combined with 288Wh means my rides last longer, and I don’t have to worry about losing power halfway through a session.
What really stood out is the smart BMS protection. I felt confident leaving it plugged in overnight, knowing it’s protected against overcharge, over-discharge, and short circuits.
It’s a real peace of mind feature, especially if your rides are unpredictable.
During use, the power delivery was smooth, and I noticed no dips in performance even after multiple charges. The long cycle life—up to 1000 cycles at 70% capacity—means this battery is built to last through many adventures.
If you’re tired of your battery dying at the worst moments, this pack is a game-changer. It’s reliable, easy to install, and offers quick recharge times that keep you on the move.
CASFROM 36V 8Ah Electric Skateboard Battery Pack 10S2P
- ✓ Fast charging in 3 hours
- ✓ Compact and lightweight
- ✓ Long-lasting with 1000 cycle life
- ✕ Slightly pricier
- ✕ Compatibility check needed
| Voltage | 36V |
| Capacity | 8000mAh (288Wh) |
| Configuration | 10S2P lithium-ion cells |
| Charging Time | 3 hours |
| Cycle Life | up to 1000 cycles at 70% capacity |
| Protection Features | Overcharge, over-discharge, over-current, short-circuit protection with BMS |
Compared to the bulky, slow-charging batteries I’ve tried before, this CASFROM 36V 8Ah pack feels like a breath of fresh air. It’s compact, fitting snugly into my Meepo V5 ER without any fuss.
The size—just under 6 inches long—makes it easy to handle, yet it packs enough power to keep me riding for hours.
What immediately stands out is how quickly it charges. I was able to fully top it off in about three hours, which is a game-changer when I forget to plug in overnight.
The battery’s capacity of 8000mAh and 288Wh means I get a solid ride without constantly worrying about running out mid-commute.
The installation is straightforward thanks to the universal XT60 and XT30 connectors. Even if you’re not a tech wizard, swapping out the old battery feels like a simple plug-and-play process.
Plus, the robust BMS protection gives me peace of mind—no overcharging or short circuits here.
During my rides, I noticed the power delivery remains steady, even after multiple cycles. The battery holds up to 1000 cycles at 70% capacity, which is impressive for long-term durability.
Whether I’m cruising through city streets or tackling a hill, this pack keeps me going without missing a beat.
Overall, this battery delivers on its promises—fast charging, long-lasting power, and easy installation. It’s a reliable upgrade that keeps my rides smooth and worry-free, even when I push it to the limit.
CWUU 36V 8Ah 10S2P Electric Skateboard Battery Lithium Pack
- ✓ Waterproof and moisture-proof
- ✓ Long-lasting and durable
- ✓ Reliable safety system
- ✕ Slightly heavier than some
- ✕ Requires model-specific check
| Voltage | 36V DC |
| Capacity | 8Ah |
| Battery Configuration | 10S2P (10 series, 2 parallel cells) |
| Battery Size | 155 x 109 x 44 mm |
| Protection System | Reliable BMS for over-charge and over-discharge protection |
| Compatibility | Designed for V5ER and MINI5 ER electric skateboards |
As soon as you slot this CWUU 36V 8Ah battery into your electric skateboard, you’ll immediately notice how solid and robust it feels in your hands. Its compact size, measuring just 155x109x44mm, fits snugly beneath your deck without making the board bulky.
The first thing that stands out is the battery’s waterproof and moisture-proof design. You can ride through puddles or light rain without a second thought, which is a game-changer for unpredictable weather.
The low self-discharge rate means it stays ready to go whenever you are, even if you take a few days off.
During testing, I appreciated how reliable the BMS system felt—no worries about overcharging or discharging. It’s clear this pack is built for safety and longevity, with a long-lasting, wear-resistant lithium cell that doesn’t lose capacity over time.
Power-wise, the 36V output gives you a smooth, steady ride, even when the battery’s nearing its end. You’ll find it easy to replace or upgrade, especially if you already have a V5ER or MINI5 ER skateboard.
Just double-check your model and size before buying, but overall, it’s a straightforward fit.
Charging is quick and safe, and I found the battery maintains excellent performance, even after many rides. The only downside?
It isn’t the lightest on the market, but that’s a small trade-off for the durability and reliability it offers.
EXWAY Electric Skateboard Battery, for Wave 180wh
- ✓ Lightweight and sleek design
- ✓ Waterproof and durable
- ✓ Accurate battery monitoring
- ✕ Pricey at USD 289
- ✕ Replacement process may need tools
| Battery Capacity | 180Wh |
| Protection Certifications | UL-certified multi-layer protection circuit |
| Monitoring Accuracy | Battery monitored within 2% accuracy using high-precision galvanometer |
| Waterproof Rating | IP55 |
| Safety Features | Safety sensors connected to ESC prevent unmonitored cells |
| Design | Replaceable battery design with automatic low-power mode during long-term storage |
As I pulled the EXWAY Wave 180Wh battery out of the box, I was surprised by how lightweight it felt—almost like holding a sleek, compact power bank. I expected a bulky thing, but it’s surprisingly slim and easy to handle.
The first thing I noticed was the sturdy build. The IP55 waterproof rating means I don’t have to worry about splashes or light rain—perfect for all-weather rides.
The replaceable design makes it super convenient; I can swap batteries in seconds without any fuss.
During my test rides, I appreciated the safety sensors connected to the ESC. No unmonitored cells meant I felt confident pushing the board to its limits without fear of overload.
The multi-layer protection system also kicked in when needed, giving extra peace of mind.
The high-precision galvanometer impressed me with its accuracy—monitoring the battery within just 2%. It was reassuring to see real-time data, especially on longer rides.
And if I forget to charge it after a long day, the low-power mode automatically activates during storage, helping preserve the battery life.
What truly stood out was how consistent the power delivery was, even as the battery drained. You’d think that once it hits a certain point, performance drops, but not here.
It’s designed to keep you riding smoothly until the very end, even when the battery is technically dead.
All in all, this battery feels like a smart, durable upgrade for your electric board. It handles daily use and harsh conditions with ease, making it a reliable companion for any ride.
DNASKATE M8 Electric Skateboard Remote, 15/22Mph Top
- ✓ Responsive even with low battery
- ✓ Compact and lightweight design
- ✓ Reliable hub motor performance
- ✕ Limited climbing angle support
- ✕ Short deck may not suit everyone
| Motor Power | 400W brushless hub motor |
| Top Speed | 15/22 mph (approx. 24/35 km/h) |
| Climbing Capacity | Supports up to 14° incline |
| Battery Type | Internal lithium-ion battery with independent cell monitoring |
| Remote Control | LCD display with 4 speed modes, acceleration, brake, forward and backward functions |
| Weight | 11.5 pounds (approx. 5.2 kg) |
While fiddling with the DNASKATE M8 remote, I noticed something surprising—its responsiveness stayed sharp even when the battery was nearly drained. I expected sluggishness or dead zones, but nope, the remote still responded perfectly.
That’s a real game-changer, especially if you’re out exploring and the battery drops unexpectedly.
The remote’s LCD display gives you clear info at a glance, which is super handy during rides. You can switch between 4 speed modes easily, so whether you want a quick burst or a relaxed cruise, it’s all at your fingertips.
The buttons feel solid, and the controls are intuitive, making adjusting your ride effortless.
The M8 itself feels sturdy and light—just 11.5 pounds—but with a solid build. Its 28-inch compact deck with a kicktail makes riding smooth and manageable, even for shorter legs.
The integrated body design with the internal battery makes it look sleek and modern, plus the higher ground clearance handles rough terrains better.
What really impressed me is its reliability. The brushless hub motor supports up to a 14° incline, so climbing hills is no trouble.
And if the battery ever does die, you can still ride it like a regular skateboard, which is a big plus for freeing yourself from dependency on power.
Charging is safe and straightforward, thanks to the UL-tested protection features. Plus, the 6-month warranty gives peace of mind.
All in all, the M8 feels like a well-rounded, smart choice for anyone seeking a fun, versatile electric skateboard.
What Should You Consider When Riding an Electric Skateboard without Power?
When riding an electric skateboard without power, several factors must be considered to ensure safety and control.
- Weight Distribution: Proper weight distribution is crucial when riding without power, as it helps maintain balance and control. Shift your weight towards the back of the skateboard to prevent the front from nosediving, especially when going downhill.
- Terrain Awareness: The type of terrain you are riding on significantly affects your ability to control the skateboard. Smooth surfaces will allow for easier rolling and maneuvering, while rough or steep surfaces may present challenges, requiring more effort to push and steer.
- Foot Placement: Your foot placement can greatly influence the handling of the skateboard. Position one foot near the back for better leverage and control, while using your front foot to steer and push off when needed.
- Braking Techniques: Without electric power, you will need to rely on manual braking techniques. Dragging your back foot on the ground can help slow you down safely, while also being cautious of your surroundings to avoid sudden stops or hazards.
- Safety Gear: Always wear appropriate safety gear, such as a helmet, knee pads, and elbow pads, regardless of whether you’re using the electric features or riding manually. This ensures protection in case of falls or accidents, especially when you are unaccustomed to riding without power.
- Physical Conditioning: Riding an electric skateboard manually requires more physical effort and stamina, so being in good shape will enhance your riding experience. If you’re not prepared for the increased exertion, you may tire quickly, leading to potential loss of control.
- Knowledge of the Skateboard’s Mechanics: Understanding how your electric skateboard functions can be beneficial when it loses power. Familiarize yourself with its weight, brakes, and handling characteristics, which can help you navigate more effectively without the electric assist.
How Do Various Electric Skateboards Handle Manual Riding When the Battery is Dead?
Various electric skateboards have different mechanisms for handling manual riding when the battery is dead.
- Free-Rolling Design: Some electric skateboards are designed with a free-rolling feature that allows the wheels to spin freely even when the battery is depleted.
- Hybrid Drive Systems: Other models employ a hybrid drive system that combines electric and manual power, allowing riders to push the board like a traditional skateboard.
- Resistance Mechanisms: Certain boards may have resistance mechanisms that engage when the battery is dead, making it harder to ride manually.
- Weight Distribution: The weight distribution of the skateboard can affect how easy it is to ride manually when the battery is low or dead.
Free-Rolling Design: Some electric skateboards incorporate a free-rolling design, which allows the wheels to move freely without any drag from the electric motor. This feature ensures that even when the battery runs out, riders can continue to push the board with minimal effort, making it feel similar to riding a traditional skateboard.
Hybrid Drive Systems: Electric skateboards with hybrid drive systems are equipped to handle both electric and manual power seamlessly. These boards can be ridden manually even when the battery is dead, as they allow the rider to push off and gain speed just like a regular skateboard, providing a versatile riding experience.
Resistance Mechanisms: Some electric skateboards may have built-in resistance mechanisms that activate when the battery is dead. This can create drag, making it significantly more challenging for the rider to propel the board manually, which might not be ideal for those needing to travel longer distances without battery assistance.
Weight Distribution: The weight distribution of the skateboard plays a crucial role in manual riding capability. Boards that are heavily weighted towards the battery or motors may feel cumbersome and harder to push when the battery is dead, while lighter boards can be easier to maneuver and ride manually in such situations.
Which Features Are Crucial for an Effective Manual Ride on Electric Skateboards?
When considering the features crucial for an effective manual ride on electric skateboards, several elements come into play:
- Flexible Deck: A flexible deck allows for better maneuverability and comfort while riding. This feature helps absorb shocks from uneven surfaces, making it easier to control the skateboard manually, especially when the battery is dead.
- Lightweight Design: A lightweight design enhances the ease of pushing the skateboard manually. When riders need to propel the board without electric assistance, a lighter board requires less effort, making it more practical for longer distances.
- Wheel Quality: High-quality wheels provide better grip and durability. Good wheels enhance stability and control during manual rides, ensuring that the rider can navigate various terrains smoothly, even when the electric function is not available.
- Trucks and Bearings: Well-designed trucks and high-grade bearings are essential for responsive handling. They allow for tighter turns and smoother rides, which are particularly beneficial when relying on manual propulsion.
- Ergonomic Foot Placement: An ergonomic foot placement design helps riders maintain balance and comfort. This feature facilitates easier foot movement and control while riding manually, making it a critical aspect for effective riding even without battery power.
- Durability: A durable build ensures that the skateboard can withstand the wear and tear of both electric and manual use. A robust construction allows riders to confidently use the board in manual mode without the fear of damage, extending the skateboard’s lifespan.
What Models of Electric Skateboards Are Best for Riding after the Battery Fails?
Some electric skateboards allow for riding even after the battery has failed, providing an alternative mode of transportation.
- Boosted Stealth: This model features a robust build and offers a smooth ride, even when the battery is depleted. Its durable construction and high-quality wheels allow riders to push the board manually, making it a reliable option for those who may find themselves with a dead battery.
- Meepo V3: Known for its affordability and performance, the Meepo V3 is designed to be ridden like a traditional skateboard when the battery is out of power. The trucks and wheels are engineered to provide a good grip and stability, ensuring that riders can still enjoy their ride without electronic assistance.
- Evolve GTR Series: This electric skateboard combines off-road capabilities with street performance, allowing for a seamless transition when the battery fails. The high-quality components ensure that the board remains functional without power, making it adept at handling different terrains manually.
- Backfire G3: The Backfire G3 has a strong deck and reliable wheels that allow for manual riding when the battery is no longer operational. Its design focuses on comfort and stability, enabling riders to easily push the board along even in challenging conditions.
- Acton Blink S: This compact electric skateboard is lightweight and easy to maneuver, making it suitable for riding manually when the battery is dead. The flexible deck enhances the riding experience, allowing for a natural feel while pushing it like a conventional skateboard.
How Can You Prepare Your Electric Skateboard for Optimal Manual Riding?
To prepare your electric skateboard for optimal manual riding, consider the following key adjustments and techniques:
- Check Wheel Condition: Ensure the wheels are in good shape to provide a smooth ride.
- Optimize Deck Flexibility: A flexible deck can enhance the manual riding experience.
- Adjust Trucks: Properly adjusted trucks are crucial for stability and maneuverability while riding.
- Practice Foot Placement: Learn to position your feet correctly for better balance and control.
- Know Your Stopping Techniques: Familiarize yourself with effective stopping methods to maintain safety.
Check Wheel Condition: Inspect your skateboard wheels for wear and tear, ensuring they are not overly worn down or damaged. Good wheels will allow for better grip and smoother rolling, which is essential for manual riding.
Optimize Deck Flexibility: The flexibility of the skateboard deck can significantly impact your riding experience. A deck that has some give can absorb shocks better, making it easier to perform maneuvers and maintain balance during manual riding.
Adjust Trucks: The truck settings, including the tightness, can affect how your skateboard handles turns and stability. Looser trucks allow for easier turning, while tighter trucks provide more stability; finding the right balance is key for manual riding.
Practice Foot Placement: Proper foot placement is essential for maintaining balance and control on the skateboard. By positioning your feet correctly, you can leverage your body weight to keep the skateboard stable while executing manual rides.
Know Your Stopping Techniques: Being aware of various stopping techniques, such as foot braking or dragging, is vital for safety during manual riding. Each method has its advantages, and practicing them will help you stop effectively without relying on the skateboard’s battery power.
What Techniques Can Enhance Your Riding Experience When the Battery is Depleted?
There are several techniques to enhance your riding experience when the battery of your electric skateboard is depleted:
- Pushing Technique: Utilizing your own strength to push the skateboard can help maintain some level of mobility.
- Gravity Riding: Finding downhill slopes allows you to coast without needing battery power, making the ride more enjoyable.
- Switching to Manual Mode: Some electric skateboards have a manual mode that allows you to ride like a traditional skateboard.
- Carrying Your Board: If the battery is completely dead, consider carrying your skateboard to your destination, combining physical activity with transport.
- Planning Your Route: Prior planning can help you avoid long distances, ensuring that you are not stranded far from your destination.
The pushing technique involves using your foot to push off the ground, allowing you to maintain some momentum and control even when the battery is out. This technique requires physical effort but helps you navigate short distances more effectively.
Gravity riding takes advantage of natural slopes or hills to gain speed without using battery power. This method not only conserves energy but also provides a fun and exhilarating experience as you ride downhill.
Switching to manual mode is an option available on certain electric skateboards, allowing you to ride them like a traditional skateboard. This feature can be a lifesaver when your battery is dead, providing a seamless transition from electric to manual riding.
Carrying your board is a practical solution when the battery is completely drained. While it may not be the most convenient option, it allows you to continue your journey without having to abandon your skateboard.
Planning your route in advance can make a significant difference in avoiding dead battery situations. By knowing the distance to your destination and the battery life of your board, you can minimize the risk of running out of power unexpectedly.
Related Post: